Introduction
The KY-008 Laser Module 650NM 5V head is composed of a light-emitting tube, condenser lens, and adjustable copper sleeve and it is assembled when expressed, the focal length of the lens is adjusted and glued by a strong glue stick, which can work directly after connecting to a 5V DC power supply.
Features of
Pinout of
| Pin Name | Description |
| VCC | Module power supply – 5 V |
| GND | Ground |
| SIGNAL | Signal pin (to activate and deactivate laser) |
Specifications of
| Voltage | 3.0 V – 5 V. |
| Line length | about 135 mm. |
| Output | red laser straightly(650nm). |
| Driver | APC circuit. |
| Outer diameter | 6 mm. |
| Pot size | 15 meters spot for φ10 mm ~ φ15. |
| Operating temperature | -36 ~ 65◦C. |
| Operating Current | 40mA. |
| Transmit power | 58mW. |
| Size | Φ 12.0 x35mm. |
Application
- Laser test tools.
- Concentricity positioning.
- Medical equipment positioning.
- Production of signal equipment.
- Use for DIY or robots.
- All kinds of level meters
Datasheet of
Download (ABC Name) Datasheet from the link given below.