Introduction
IRF520 MOSFET module controls DC motors by PWM (Pulse Width Modulation) technique and this module convert a constant input voltage to a variable voltage. The module is designed to replace heavy DC loads from a single digital pin of your microcontroller. The simple breakout board for the IRF520 Mosfet Arduino or another 3-5v microcontroller. Pulse current through a PWM pin, and use this to control a pump, LED, or other DC tool at up to 24v, and ~5A Module. IRF520’s main purpose is to offer a low-cost way to drive a DC motor for robotics applications, but the module can be used to control mostly high-current DC loads. Screw terminals are provided to interface with your load and an external power source and LED indicator provide a visible indication of when your load is being switched.
![IRF520 MOSFET Driver Module](https://www.circuitdatasheet.com/wp-content/uploads/2023/10/IMG-20231028-WA0012.jpg)
Features of IRF520 MOSFET Driver
- TOP MOSFET Button IRF520 MOSFET Driver Module for Arduino ARM Raspberry pi
- The original IRF520 power MOS tube can be adjusted PWM output
- Can drive up to 24V of the load, such as LED lights, DC motors, micro pumps, solenoid valves
- Used PWM can be adjusted LED step-less dimming, step-less speed regulation motor
Pinout of IRF520 MOSFET Driver
![IRF520 MOSFET Driver Pinout](https://www.circuitdatasheet.com/wp-content/uploads/2023/10/IMG-20231028-WA0007.jpg)
Pin Name | Pin Description |
VCC | Power Supply |
GND | Ground Pin |
SIGNAL | Signal Pin |
Specifications of IRF520 MOSFET Driver
Port | Digital Level |
Weight | about 10g |
Voltage | 3.3V, 5V |
Output load voltage | 0-24V |
Size | about 33*24mm |
Output load current | <5A (1A above needs to add heat sink) |
Platform | Arduino, MCU, ARM, raspberry pi |
Datasheet of IRF520 MOSFET Driver
Download (IRF520 MOSFET Driver) Datasheet from the link given below.