801S Vibration Sensor for Arduino

Introduction

The 801S shock and vibration sensor, with its aid of itself, modifications its resistance while subjected to vibrations. The resistance adjustments are so excessive that the 801S is like a switch. The datasheet claims that this gold-plated device can withstand 60 million shocks. As with most resistance-varying devices, the 801S is connected to a voltage divider circuit to get a voltage output.
It’s a high-sensitivity 801S Sensor module, which has two output signal pins and one digital pin(D0), while it detects some vibration as much as a certain threshold, it is able to output high or Low degrees and another analog pin (A0), is able to actual-time output voltage signal of the 801S vibration this is a Robotics 801S sensor or shock sensor that may indicate a problem is coming. This Vibration sensor may be your device going haywire, tools on a robot missing teeth, or worse, a looming earthquake! on this vibration sensor tutorial, we can look at how to come across vibrations through the usage of specially designed sensors and an Arduino microcontroller.

Features of 801S Sensor

  • Having a signal output instruction;
  • With a TTL level signal and the analog output signal;
  • The output valid signal is high, the light goes out;
  • The sensitivity is adjustable (fine-tuning);
  • The wide detection range of vibration, no direction;
  • With mounting holes, firmware installation is flexible and convenient.

Pinout of 801S Vibration Sensor

Pin TypeDescription
VinInput Voltage
GNDGround Pin
OUTOutput Pin

Specifications of 801S Vibration Sensor

MODEL801S Sensor

Datasheet of 801S Vibration Sensor

Download ( 801S Sensor ) Datasheet from the link given below.

Leave a Comment